Efficient Engineering-filament Printing – for non-print Engineers
Ultrafuse® ABS Fusion+ is an easy-to-print engineering material and enables a much more efficient printing process.
Meaning 3D printing operators will spend less time tinkering and more time exploiting the full potential of your 3D printing rig. To top it off, Ultrafuse® ABS Fusion+ adheres to water-soluble support – no more hassle with chemicals, just dissolve your support in water after printing! The 3D printing community has so far considered ABS an unforgiving material: Now, thanks to the unique properties of ABS Fusion+ you can look forward to a high success rate with greatly improved dimensional stability.
Recommended: Process materials in a well ventilated room, or use professional extraction systems. For further and more detailed information please consult the corresponding material safety data sheets.
Safety Data Sheet: ULTRAFUSEABSNATURAL_979934_SDS_GEN_GB_EN_1-0 ULTRAFUSEABS_957058_SDS_GEN_EU_EN_5-0
Benefits at a Glance
- Easy to print
- Direct printing on heated glass or print bed surfaces
- High heat resistance
- Adheres to water soluble support
- Jigs and fixtures
Tensile Strength (MPa): 17.9 (ZX), 29.5 (XY)
Flexural Modulus (MPa): 878(ZX), 1133 (XZ), 1406 (XY)
Elongation at Break: 2.1 % (ZX), 10.9 % (XY)
Impact Strength Izod notched (kJ/m2): 2.2 (ZX), 38.4 (XZ), 26.4 (XY)
Impact Strength Izod unnotched (kJ/m2): 6.6 (ZX), 131.1 (XZ), 73.1 (XY)
HDT @ 0.45 MPa: 91 ºC
There are no reviews yet.